Trimming wheels

Modificaciones
Trimming wheels

Styles

Look in accessory shops or manufacturers' catalogues to see what is available and what would suit your car - you will find a vast range on the market, from quite basic sets in plain matt finishes to brightly coloured and chromed finishes. Some trims look like expensive alloy or wire spoked wheels.

Many of the trims are made from reinforced plastic which is both resilient and has some resistance to shattering and stone-chip damage. So, apart from enhancing the overall look of your car, the trims can also provide a degree of protection for the wheels.

Embellishers

'); window.addEventListener('adverts:ready', function() { console.log("Adverts ready"); window.adsbygoogle.push({ params: { google_ad_slot: '1227867061' } }); console.log(window.adsbygoogle); }); } })();

Wheel embellishers are similar to the trim covers. These are designed to fit just around the rim of the wheel and are also available in chrome or matt finishes. These look most effective when they are fitted to wheels that have a small central wheel nut cover.

Fitting

The trims and embellishers simply clip into place on the wheel rim. Before fitting, however, it is worthwhile giving the wheels a quick coat of rust-retarding black paint, especially if they already look badly rusted. This not only hides the rust, it also ensures that the wheel won't show through the trim.

1. Clean the wheels

Before fitting the wheel trims, clean the wheel of all dirt and road grime with a stiff brush and a general degreasing agent. If the deposits are heavy, work the degreaser well in with the brush and allow time for it to take effect before rinsing thoroughly with water. Dry off the wheels with a rag.

2. Preparation

The effect of the wheel trims will be spoiled if you can see a scratched or rusty wheel through them. This is easily solved by giving the wheels a quick coat of paint. Make sure the wheel is absolutely dry, then apply masking tape to the tyre around the wheel rim.

3. Painting

You can use either a spray-on or brush-on paint for the wheels. Black paint will provide the best contrast for the trim. The wheel does not have to be removed from the car before painting. Apply the paint and allow it to dry thoroughly before fitting the trims.

4. Fitting

If the trim seems a bit loose when fitted try bending the securing clips out slightly. If this still doesn't improve the fit you can solve the problem by fitting ducting tape to the wheel rim. Offer up the trim to the wheel and mark the position of each securing clip. Apply the tape to the rim in each position.

5. Fitting the wheel trims into position

Offer the trim up to the wheel. Make sure the tyre valve cut-out, often formed in the trim moulding, is correctly positioned. Working around the circumference of the trim, knock it into position with your hand. Remember not to bend the trim too far or try to knock it on with a hammer leading to it shattering.

Some trims may fit under the wheel nuts.

Traducido por Juan Pita

Juan es una máquina de traducir. En todo momento parece estar estimulado por algún tipo de bebida que prepara en un recipiente portátil y que requiere de dos litros de agua hirviendo.